すべての人のための家庭用地震計。精密で、オープンで、いつも稼働。

“I was in Vega Alta when I got the alert for the magnitude 4.8 earthquake in the southwest, 15 seconds before the shaking reached my home.”

“Very easy to install. Took about 10 minutes counting bolting it to the floor. Luckily we don't have a lot of earthquakes where I live, but every once in a while we get a little shake. I'm hoping this device will help me to notice events nearby, and possibly even help others. It is a very interesting and unique device!”

“Setup was fast and under strict recomendetion of developer perfectly coordinated with Android software.Although i'll rather have sensor on flat surface,I was forced regarding real environmental circumstances to mounth it on the wall under 90 angle degrees with "bias" of 0.4- 0.2 degrees from best 90 result.Device is software set to accept only real and serious seismic shaking,not usuall dayly "murmurs ,buzzing and noises".in15 days of observation there was not false alerts and alarms in circle area of 150 km air circumference around the sensor( some small quakes intensities 2.0,2.5 and 3.0 in Adriatic sea Bosnia-Montenegro border and Northern Italy or Slovenia are not noted.I buy GeoShake to prevent bad surprises while sleeping or resting because live in seismic active carsic mountain area full of deep caves where intensities of 4.0 where noted 3 years ago.Only thing that wory me is cut of electrical power and should be more peacefull that Geoshake T1 have li- ion rechargeable battery source intependent of wired power source because in that case I have possibility to use 4 or 5G network from phone untill wireless and el.current restores.I beleive my mounted T1 on strong steel armour beton wall wall with flat-glass surface glued with acrilic thin mass under 24/7 electrical power and flat wireless network is good & relyable to alarm me and people around me (and familly )on relevant strong and strongest catastrophic seismic events to be promt for proper reactions during at least first 5 minutes .Also detection of small near events because for seismic enthusiast like I am even more small near events may be sign of hard one.Many thanks to developer for hardware and appropriate softvare.For me perfect investment,but small number of followers around me in area have Geoshake.I beleive this is going to change in near future!I'll do my best to educate those that have interest!”

“Came up on Facebook and I took a chance. Had to pay a duty tax coming in from another country. Again, took a second chance, but in the end it arrived, connection was easy, and boom it works! We need more in the US to give us really good readings.”

“Fantastic! Highly recommended”

“it works flawlessly and set up in a few minutes, just have to print the eclosure and it's interesting to watch how the ground actually microshakes...”

“Easy to install. App is great and really gives great measurements.”

“It should have a charger, I mean really, for that price it should”

“Setup couldn’t have been simpler. The hardest part was deciding where to place it. Both the App and Web interfaces work great.”

“Was so easy to get up and running. Now I am an official station!!! Super coolness!!”

“It was a breeze to set up. The most difficult part was to find a low noise location with adequate wi-fi signal strength. The result was a location with strong wi-fi but less than optimal ambient noise. I'm still considering other locations. One thing that would have been useful to me in deciding to buy this product was a diagram or table showing a max distance from quake source to detector as a function of quake magnitude. I understand there is variability in this, but some statement relating to this would have been useful. (I still would have bought it anyway, but it would have been of value.) Best, Ron”

“Easy to use: plug it in, set it up, and run it! No issues so far! You can easily 3D-print an enclosure for it yourself.”

“I started building one myself a couple of years ago with EMS devices, and I was fighting with the noise. Then added a second and struggled with synchronicity. Seems you nailed it, and the network is great too. Now I'm trying to find a neighbour so that we can build a team of 3.”

“I hope that one day lives can be saved with the network.”

“I bought a GeoShake T1 Maker Edition for a very concrete job: documenting the vibrations from heavy vehicles passing in front of my house, where a cracked road surface makes every bus and truck felt inside. What convinced me is that it is not a black box. The sensor samples fast enough to show real waveforms, and I can download and analyse the raw data myself, match events against bus timetables and my own observations, and tell road traffic apart from activity in the house. With timetables and my own notes, I can usually identify which bus or truck just passed, and over weeks that turned a feeling — "the house shakes when a bus passes" — into measurements I could compare, day after day. For a small, maker-built board from a name I had never heard of, it has done serious, everyday work, and I trust what it records because I can check it.”

“Tamer, greetings. I'm very happy to have the GeoShake T1, and I've seen how my island has been preparing since I started looking for information. The only thing that worries me is integrating devices such as lights, alarms and others. I can't use Tuya, Alexa or Google; my device won't let me integrate with others.”

“I've had my GeoShake T1 about a month. I live in Alaska, a very seismically-active location. I've always been fascinated with earthquakes and having a device that is "listening" to the earth movements at my home is very satisfying. The setup was straightforward. The most difficult part was selecting a location and installing it on the floor. Here are some of the considerations I used when selecting the location: 1. Select a location where I can connect it to a UPS. I have a UPS for my internet router and cable modem, and I was able to use the USB port to power the T1. Now I know that if power goes out, the T1 will have power, along with the router and cable modem. It also happens to be the case that this location is in a quiet spot in my home. This also insures that the Wi-Fi signal will be strong. 2. I installed it so that the device is square to true north. I know that for now, the device orientation is not important, but I thought that if at some future time GeoShake was able to align the device to north, it would be easy to do. Note, this isn't necessary for the T1 to work, and it was easy to do in my house because the house is aligned with north. My T1 was the first in Alaska, and there is another that is now nearby. I would love to see more of them spring up, particularly around me... But they are interesting and fun no matter where. I am looking forward to the addition of a third, and more T1 devices in my area. So far, there have been two seismic events that my device has detected. They were small and I didn't feel them, but the data is unmistakable. You should get one... at least one!”

“Easy installation, just plug it in and you're done. It's a good way to know when the ground is shaking, and there's a special price for Latin America. I've recommended it to several family members and friends. It adds an extra layer of peace of mind at bedtime, on top of having the emergency bag ready. I hope the network keeps growing!”

“「オアハカの実家に 1 台設置しました。ネットワークが週ごとに広がっていくのを見るのは、本当に心強いです。」”